上海山耕機電科技有限公司
上海廠家直接供應NHG-2000型水溶花邊定型機
價格:¥35000.00
價格:¥30000.00
| 品類 | 粘合機 定型機 | 品牌 | sanko粘合機 |
|---|---|---|---|
| 規格 | 600 | 折舊程度 | 全新 |
| 型號 | 600型機械有縫帶 |
適用范圍:applicable scope:
針對平織、針織裁片粘合,對橫機領、下蘭、起皺面料的縮水、烘干、壓光定型,現代服裝廠必不可少的專業設備
for woven, knitted pieces of glue on the horizontal collar, under the blue, wrinkled fabric shrinkage, drying, calendering stereotypes,
modern garment factory specialized equipment necessary
性能特點:performance characteristics:
1、品質好效率高:連續式粘合效率高,采用強力氣缸加壓, 粘合后衣料平整牢固, 耐洗滌,不易起皺
2、皮帶自動修正:自動皮帶修正配置確保皮帶不偏離
3、加熱溫度均勻:專業器件智能控制溫差至*小,加熱區溫差不大于±8℃
4、冷卻快定型佳:配備網帶輸送系統,冷卻速度快,布料粘合定型效果好
5、機器穩定性強:配備自動延時停機裝置和突然停電手動保護鐵氟龍帶,延長皮帶使用壽命
6、膠輥壓力穩定:在膠帶寬度范圍內壓力均勻
7、自由調節功能:溫度、壓力、速度根據需要在規定范圍內自由調節
8、皮帶自動清潔:自動翻轉撥片徹底清潔皮帶
9、機械轉動平穩:噪聲小,*大噪聲不超過70分貝
1.good quality and high efficiency: continuous bonding, high efficiency, the use of force cylinder pressure,
adhesion formation after the clothing firm, resistant to wash, easy to wrinkle
2.belt automatic correction: automatic belt configuration to ensure that the belt does not deviate from the
correct
3.heating temperature: professional intelligent control device temperature to a minimum, the heating zone
temperature is not greater than±8℃
4.cooled fast good shape: with a belt conveyor system, the cooling speed, fabric glue shape effect
5.strong stability of the machine: shutdown with automatic time delay devices and hand protection teflon with a sudden power outage, extended belt life
6.roller pressure is stable:within the width of the tape even pressure
7.free adjustment function: temperature, pressure, speed required free adjustment within the specified scope
8.automatic belt cleaner: automatic paddles thoroughly clean the belt flip
9.mechanical smooth rotation: noise, noise does not exceed 70 db maximum
技術指標:techno parameters:
電源(v)power supply | 380v |
功率(kw)power | 9.6kw |
加壓方式 pressurized motion | 輥式roller type |
粘合溫度temperature bonding | 0-200℃ |
粘合寬度width for bonding | 600/900/1200/1500/1800mm |
體積volume | 2950*1500*1200 |


